Care And Cleaning - Kenwood IC700 serie Gebrauchsanweisung

Downloaded from www.Manualslib.com
When using the steam function, the
green ready to steam indicator light
will go off.
●
It is possible to vary the amount of
steam produced. Move the variable
steam control to the right for
maximum steam and to the left for
minimum steam.
6 The red low water indicator light will
glow continuously when the water
tank becomes empty. This will be
accompanied by a continuous
humming noise of the pump. Should
this occur we recommend you
switch off the steam station. Remove
the water tank and refill.
Note: For prolonged use always
ensure there is water in the water
tank.
hints
●
Wool and velvet. Guide the iron 2 cm
above the fabric, depressing the steam
button. The power of steam smoothes
away creases and revitalises the fabric.
Do not pull the fabric.
●
Vertical ironing – suits, dresses and
curtains are smoothed, renewed and
put into shape again while they are
hanging (see below).
PTFE soleplate
(model IC800 only)
The soleplate can be fitted when
ironing delicate items such as silk.
Follow the instructions given on the
packaging and keep them handy for
future use. Always take care when
fitting, particularly if the iron is hot.
If the soleplate (Kenwood model
ICSP01) is not included in pack it
can be purchased separately from
the shop where you purchased your
steam station.
steaming the creases out of
curtains, hanging clothes,
wall hangings
1 Make sure there is water in the tank.
2 Turn the temperature control to
.
manuals search engine
3 When the green ready to steam light
glows pull the material slightly with
one hand: hold the iron upright with
the other.
4 Tilt the iron forwards, then move it
down the material, pressing the
steam button.
●
Never steam clothes being worn.
Keep your hands away from the
steam and soleplate.
●
Always ensure that the iron is facing
away from the user and/or others
when vertical steaming.
●
For material other than linen or
cotton, keep the iron off the material
to avoid burning it.

care and cleaning

●
Always switch off, unplug and allow
to cool overnight before cleaning or
storing.
●
Empty the water tank.
●
When carrying the unit, always use
the carry handle and make sure the
iron is secure before moving.
the outside
soleplate
●
Don't scratch the outside by ironing
anything hard eg zips.
●
To remove minor remains of material
stuck to the soleplate, rub
lengthways with a soft, damp, non-
metallic cleaning pad.
casing
●
Wipe with a damp cloth.
5