Assembly & Installation; Battery Disposal - V-TAC VT-7815 Installationsanleitung

ENGLISH
Read these instructions fully before assembly or installation of your solar lights.
Position
a) Choose a position that will allow the solar panel to receive the maximum hours of
available sunlight. Shady locations will not allow battery to be fully charged.
b) Choose a position where the solar panel will not receive illumination from street
lights, house lights or other light sources that may be detected by the light
sensor in the solar panel, which will prevent your solar light illuminating during the
night.
c) Maintain a distance of at least 1.5 meters between individual lights, lights posi-
tioned to closely together may trigger the light sensor in the solar panel and prevent
your solar light illuminating or to intermittently flicker during the night.
Assembly & Installation
a) Remove the Egg lampshade (Part A) from the solar panel (Part B), then move the
switch to "WW" or "C" position to open the light, then fix the Egg lampshade (Part
A) with the light part (Part B).
b) Fix the Ground stake (Part C), to the solar panel underside part B.
c) Force the Ground Stake (Part C) into the ground in the selected location. If the
ground is hard you may have to soften it by adding water, or create a pilot hole by
hammering a metal stake or similar object into the ground where the Ground Stake
is to be inserted.
Operation
a) Turn the switch located inside the Egg lampshade beside the solar panel to the
"WW" or "C" position.
b) Ensure that the solar panel is exposed to good sunlight for 2 days to ensure that
the battery is fully charged.
FUNCTION
The light set has two functions- steady or color changing and on/off. To activate,
follow directions below.
a) Move the switch into position "OFF", Light will be OFF.
b) Move the switch into position "WW", Light will be in Warm White steady on mode.
c) Move the switch into position "C", light will be in color changing mode.

Battery Disposal

Dispose of old batteries responsibly. DO NOT dispose of old batteries by placing in
any type of fire as the battery may explode and cause injury.
3