Declaration Of Conformity; Double Insulation - Casals VLIXS36 Handbuch

Vorschau ausblenden

Seite von 54

/ 54
Lesezeichen

Verfügbare Sprachen

batteries into your domestic rubbish, place them in

orably

Authorised collection places. They should never be

e and

thrown onto a fire.

- At the end of the product's useful life, and before

throwing it away in a container suitable for Electrical

ically

Appliances and Electronics Waste, remove the

batteries and throw them away in the appropriate

ps.

container.

- The product does not contain concentrations of

substances that could be considered harmful to the

hnical

environment.

other

- This appliance contains, or could contain,

epair

oil. Remember that one should abide by the

regulations concerning the elimination of this type

aged,

of contaminant.

s you

- This symbol means that in case you

S36

wish to dispose of the product once its

3.6

working life has ended, take it to an

1.0

authorised waste agent for the selective

180

collection of Waste from Electric and

Electronic Equipment (WEEE).

yes

0.33

< 80

< 12

thetic

hange

Double insulation

it is

- This symbol means that product may

include a battery or batteries; user must

this

to remove them before disposing of the

ction,

product. Remember that batteries must be

you

disposed of in duly authorised containers.

ublic

Do not dispose of them in fire.

used

- This symbol means that user

must to consult instructions

thoroughly before use.

Protect electrical power tool

from moisture

How to remove the batteries from the interior of the

device: (Fig. 5, 6)

CAUTION: It is important that the batteries are

fully discharged prior to its withdrawal from the

apparatus.

To remove the batteries, once the life of the appliance,

proceed as follows:

- Open the top shell of the apparatus, removing

previously with the help of a screwdriver fixing screws

(Fig 5)

- Identify the battery wires and cut their (Red and

Black). To avoid risks of a short circuit with a

possible residual battery load, first cut the Red wire

and protect it by using insulating tape, then proceed

to cut the Black wire proceeding in the same way.

(Fig 6)

- Safely remove the battery from its housing.