Grounding Instructions; Radio Interference; Important Safety Instructions - iCES IMO 20LS40 Steel Handbuch

This appliance must be grounded. This oven is
equipped with a cord having a grounding wire with
a grounding plug. It must be plugged into a wall
receptacle that is properly installed and grounded.
In the event of an electrical short circuit,
grounding reduces risk of electric shock by
providing an escape wire for the electric current. It
is recommended that a separate circuit serving
only the oven be provided. Using a high voltage is
dangerous and may result in a fire or other
accident causing oven damage.
WARNING Improper use of the grounding plug
can result in a risk of electric shock.
Note:
Operation of the microwave oven can cause
interference to your radio, TV, or similar
equipment.
When there is interference, it may be reduced or
eliminated by taking the following measures:
1. Clean door and sealing surface of the
oven.
2. Reorient the receiving antenna of radio or

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliance basic safety
precautions should be followed, including the
following:
WARNING: To reduce the risk of burns, electric
shock, fire, injury to persons or exposure to
excessive microwave energy:
1. Read all instructions before using the
appliance.
2. Use this appliance only for its intended use
as described in this manual. Do not use
corrosive chemicals or vapors in this
appliance. This type of oven is specifically
designed to heat, cook or dry food. It is not

GROUNDING INSTRUCTIONS

RADIO INTERFERENCE

1. If you have any questions about the
grounding or electrical instructions, consult a
qualified electrician or service person.
2. Neither the manufacturer nor the dealer can
accept any liability for damage to the oven or
personal injury resulting from failure to
observe the
procedures.
The wires in this cable main are colored in
accordance with the following code:
Green and Yellow = EARTH
Blue = NEUTRAL
Brown = LIVE
television.
3. Relocate the microwave oven with respect
to the receiver.
4. Move the microwave oven away from the
receiver.
5. Plug the microwave oven into a different
outlet so that microwave oven and receiver
are on different branch circuits.
designed for industrial or laboratory use.
3. Do not operate the oven when empty.
4. Do not operate this appliance if it has a
damaged cord or plug, if it is not working
properly or if it has been damaged or
dropped. If the supply cord is damaged, it
must be replaced by the manufacturer or its
service agent or a similarly qualified person
in order to avoid a hazard.
5. WARNING: When the appliance is operated
in the combination mode, children should
only use the oven under adult supervision
due to the temperatures generated.
3
electrical connection