Dmx Linking - Chauvet DJ Pinspot Bar Kurzanleitung

DMX Linking

The Pinspot Bar can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from
www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 502.
Master/Slave Connection
The Pinspot Bar uses the DMX data connection for its Master/Slave mode. Information about configuring the Pinspot Bar
for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
IRC-6 (Infrared Remote Control)
The Pinspot Bar can be operated with the CHAUVET DJ IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the Pinspot Bar User Manual from www.chauvetdj.com.
D-FI USB Connectivity
The Pinspot Bar is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from CHAUVET DJ.
Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the product's DMX
Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi USB operation
are in the Pinspot Bar User Manual or D-Fi USB Instruction Sheet.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
Pinspot Bar USB QRG Rev. 1
QUICK REFERENCE GUIDE
EN
4