Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
About This Guide
The Pinspot Bar Quick Reference Guide (QRG) has basic product information such as mounting, menu options, and
DMX values. Download the User Manual from
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and
Germany: www.chauvetlighting.eu/warranty-registration.
Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the
period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This
warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this
warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows
the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This
warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to
country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,
Luxembourg, France, Germany, and Mexico. For warranty terms in other countries, please consult your local distributor.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
•
This product is not intended for permanent installation.
•
ONLY connect this product to a grounded and protected circuit.
•
DISCONNECT from power before cleaning or replacing the fuse.
•
DO NOT look at the light source when the product is on.
•
Make sure the power cord is not crimped or damaged.
•
Never disconnect this product from power by pulling on the cord.
•
When mounting this product overhead, ALWAYS use a safety cable.
•
DO NOT allow flammable materials close to the product when it is operating.
•
DO NOT touch the product's housing when it is on because it will be hot.
•
The voltage of the outlet to which you are connecting this product must be within the range stated
on the decal or rear panel of the product.
•
This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this
product to rain or moisture.
•
In the event of a serious operating problem, stop using immediately.
•
Always mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•
Be sure that no ventilation slots on the unit's housing are blocked.
•
Never connect this product to a dimmer or rheostat.
•
Replace the fuse with the same type and rating.
•
Never carry the product by the power cord. Use only the handle to carry this product.
•
The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher
temperatures.
•
DO NOT open this product. It contains no user-serviceable parts.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Contact
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or
return a product. Refer to
What is Included
•
Pinspot Bar
•
Power cord
•
2 Omega brackets
To Begin
Unpack your Pinspot Bar and make sure you have received all parts in good condition. If the box or contents appear
damaged, notify the carrier immediately, not Chauvet.
1
QUICK REFERENCE GUIDE
www.chauvetdj.com
Contact Us
at the end of this QRG for contact information.
•
6x 10° diffusers
•
6x 20° diffusers
for more details.
•
6x 2700K CTO filters
•
Quick Reference Guide
Pinspot Bar QRG Rev. 1
Werbung
Inhaltsverzeichnis
