Control Panel Description; Dmx Linking; Footswitch Operation - Chauvet DJ GigBAR LT Kurzanleitung

GigBAR LT QRG
Mounting
Product
Mounting
Diagram
Control Panel
Description

DMX Linking

Starting
Address
Master/Slave
Connection

Footswitch Operation

1 2 3
Pedal
1 (Auto)
2 (Sound)
3 (Color)
4 (Blackout)
Before mounting this product, read the
Pod Tilt Adjustment Knob
Button Function
<MENU> Exits the current menu or function
Navigates up through the menu list or increases the numeric value
<UP>
when in a function
<DOWN> Navigates down through or decreases the numeric value
<ENTER> Activates a menu option or a selected value
The GigBAR LT can work with a DMX controller when linked by DMX serial
connections. Instructions for DMX operation are in the User Manual. A DMX Primer is
available from www.chauvetlighting.com
To ensure full access to all channels in each DMX mode, the highest recommended
DMX address is 496.
The GigBAR LT uses the DMX data connection for its Master/Slave mode. Instructions
for connecting and configuring this product for Master/Slave operation are in the User
Manual.
The included footswitch provides quick access to preset colors, programs, and
4
sound-activation through the GigBAR LT microphone.
To use the footswitch:
1.
Connect the GigBAR LT to power.
2.
Navigate to Auto or Sound mode.
3.
Press any button on the footswitch.
Function
Cycles through Auto programs
Cycles through Sound-active programs
Cycles through colors
Toggles Blackout on or off (Stops all output)
.
Safety Notes
Additional Product
Mounting Knobs
Tripod Insertion Point
.
4
Pod Pan Adjustment Knob
EN