Example To Connect An External Contact On A Switch 1 Input; Rs485/D30X And Rs485/Mb-X Connections - sylvac D300S V2 Bedienungsanleitung

Example to connect a relay on the n°1 digital output
(internal power supply)
Note: a protective diode must be added in parallel of the relay if it isn't integrated.
Example to connect an external contact on the Switch 1 input

RS485/D30X and RS485/MB-X connections

These two inputs allow an increase in the number of probes connected to the
D300S.
This input is exclusively used for the
D302 and D304 modules.
The capacitive probes (P5, P10,
P25, P50) can be connected to these
modules.
Remark :
module is correctly detected by the D300S.
This input is used to connect the MB-8i, MB-2C, MB-4C or even MB-2S type
modules. Inductive capacitive and incremental probes can be connected to
these modules.
(only available on certain versions)
9
NO NC
COM
E