Exclude From Automatic Detection; Tolerance Mode; Number Of Classes; Display Mode - sylvac D300S V2 Bedienungsanleitung

Exclusion from automatic detection
It is possible to exclude a channel from automatic instrument detection
when this is moving. This is useful, when for example, the same ins-
trument is allocated to different channels. In this case, when the ins-
trument moves, it is no longer possible to know what channel must be
selected. To avoid this problem it is possible to deactivate automatic
detection on certain channels.

Tolerance mode

<=>
GO NOGO
<=> (int)

Number of classes

values. It is possible to choose up to 8 classes. The classes are spread out
proportionally between higher tolerance and lower tolerance.

Display mode

Digital : displays the digital value
Bargraph : displays the measurement as a bargraph

Measurement mode

Direct
Max
Min
Delta
Mean
Delta (sampling)
Mean (sampling)
red – green – yellow
red – green – red
yellow – green – red (interior measure)
: displays the value live
: displays the maximum value
: displays the minimum value
: displays the difference (maximum - minimum)
: displays the average (maximum + minimum)/2
: Displays the difference over a given number of samples
: Displays the mean over a given number of samples
13
E