Usb Charger; Power Connection; Connection Of A Microphone - LOTRONIC PARTY-ROCKER Bedienungsanleitung

CONTROLS AND CONNECTIONS
Front panel
1. Light Cover Lens
2. BELT Clip
3. ECHO Control
Turn to adjust the echo up or
down
4. MIC Level Control
Turn to adjust the MIC sound level
up or down
5. Activation of the light effect
Press to turn on or off the light
show
6. Volume Control
Turn to adjust up or down
7. STANDBY
Press to power the unit on or off
8. PAIRING Indicator
9. PAIRING
Press and hold to begin pairing a Bluetooth device
10. Power Indicator
11. Main Speaker
Rear Panel
1. MIC Input 1, 2
2. GUITAR Input
3. AUDIO Output
Connect to external amplifier
4. AUX Input
5. DC Input

6. USB CHARGER

Connect to other portable device you wish to charge

POWER CONNECTION

Before using your Bluetooth wireless system, you should connect Power Adaptor to AC outlet.
1. Firmly and securely insert the DC plug of the adaptor to the DC IN jack on the rear of the unit.
2. Plug the adaptor's AC plugs into an AC outlet.
3. Power on the unit by pressing the STANDBY button on the front of the unit. The power indicator will light up.

CONNECTION OF A MICROPHONE

1. Plug the microphone into the MIC1 or MIC2 jack on the rear side of your unit. Their output is mixed with
playback from BLUETOOTH or AUX IN.
2. On the microphone, there is an ON/OFF switch. Ensure that you set the switch to ON position during the
usage.
3. The volume of microphone can be adjusted by the MIC VOLUME knob on the control panel of the unit.
4. You can start to sing-along with the music playback.
©Copyright LOTRONIC 2017 PARTY-ROCKER 3