3M Accuspray HGP Benutzerhandbuch Seite 6

To reduce the risks associated with all hazards related to the use of this product:
• Read, understand and follow all safety statements in applicable equipment owners' manuals to
avoid possible safety hazards.
• This equipment is to be used only by professionals familiar with the possible applicable
safety hazards.
• Do not use this product around unsupervised children.
• Never modify any part of this product.
• Always comply with local, state, and national codes governing ventilation, fire protection,
operation, maintenance, and housekeeping.
To reduce the risks associated with chemical exposure:
• Never point a spray gun at anyone else or place any part of your body in front of the
atomizing head.
• Before use check spray equipment for damage and proper function. Repair/replace worn, damaged
or malfunctioning components.
• Always wear appropriate personal protective equipment for eye, skin, respiratory and hearing
protection per the applicable SDS and material container labels at all times when spraying.
To reduce the risks associated with fire and explosion:
• Must maintain adequate ventilation per applicable SDS and material container labels for each
material being sprayed in the work area.
• All ignition sources such as smoking must be kept out of the spray area.
• Always maintain a readily available, approved fire extinguisher or other
approved fire fighting equipment in the spray area.
• When operating this unit, only use undamaged, suitably solvent-resistant and appropriately
pressure-rated static-conductive air hoses.
• Prior to painting, users are expected to be appropriately grounded (by either shoes or heel straps)
and should wear static-dissipative or static-conductive gloves.
To reduce the risk associated with noise:
• Always wear hearing protection while using the spray gun.
To reduce the risks associated with tripping, falling and tipping:
• Route air hoses and any extension cords away from traffic areas, sharp edges, moving parts and
hot surfaces. Do not pull on air hoses to move the compressor.
To reduce the risks associated with hazardous air pressure:
• Care for the spray gun per 3M instructions in the applicable owner's manual.
• Ensure air input pressure and all applicator system regulators are properly adjusted per material's
recommendations prior to each use.
• Always follow required air pressure relief procedures for relieving air pressure from the spray gun.
WARNING
CAUTION
5