Samsung SNC-B2331 Kurzanleitung Seite 9

4.
5.
6.
7.
SNC-B2331-ENG-QG.indd 9
In the <PORT> pane, provide necessary
information.
HTTP Port : Used to access the camera

using the Internet browser, defaulted to
80. Use the spin button to change the
HTTP Port value. The start value of the
port is 80, and increases or decreases
by 6 like 10000, 10006, 10012.
Device Port : Used to control the video signal transfer, defaulted to 60001(TCP).

TCP Port : Video signal transfer port using TCP protocols, defaulted to 60002(TCP).

UDP Port : Video signal transfer port using the UDP Unicast method, defaulted to

60003(UDP).
Upload Port : Used to upgrade the software fi rmware, defaulted to 60004(TCP).

Multicast Port : Video signal transfer port using the UDP Multicast method, defaulted

to 60005(UDP).
Enter the password.
This is the login password for the "root" user who accesses the camera.
The default password is "4321".
Click [OK].
Manual network setup will be completed.
When the manual setup including <IP> is completed, the camera will restart.
9
2009-08-20 오전 11:42: