Adjustable Laser Pointer Battery Replacement - TEXA eLight ONE Technische Bedienungsanleitung

16.1 Adjustable Laser Pointer Battery Replacement

The adjustable laser pointer is powered by 3 AA 1.5 V batteries.
The batteries must be replaced when the intensity of the laser beam decreases.
Proceed as follows:
1. Turn off the adjustable laser pointer.
2. Remove the screws on the sides of the laser
ON button.
3. Carefully remove the cover where the ON
button is installed.
Pay the utmost attention not to damage
the electrical connections.
4. Carefully remove the battery-housing slide.
5. Replace the batteries with new ones of the
same size and voltage, being careful to respect
the polarity.
6. Close the adjustable laser pointer, being
careful not to damage any electrical connection.
98