Bluetooth - TEXA eLight ONE Technische Bedienungsanleitung

13.2 Bluetooth

The device uses the Bluetooth connection to connect to a diagnostic tool and
thus make the most of the diagnostic potentials offered by the connection to the
vehicle control unit.
The configuration of the communication takes place through specific software
functions.
Proceed as follows:
1. Connect the VCI to the vehicle's OBD socket.
2. Turn the vehicle's ignition key on ON (instrument panel on).
3. Turn on the device.
4. Access the software functions for the configuration of the communication with the
VCI.
5. Follow the indications that appear on-screen to complete the configuration.
For further information see the VCI's technical manual and the software's
operating manual.
88