To Set The Alarm - Amplicomms TCL 250 Bedienungsanleitung

To set the alarm

1. Press and hold AL SET/SELECT, the AL indicator
appears and the alarm's hour digits flash. Press L or M
to set the alarm in hours (hold L/M to advance rapidly).
2. Press AL SET/SELECT once again, the alarm's minute
digits flash. Press L or M to set the alarm in minutes
(hold L/M to advance rapidly).
3. Press AL SET/SELECT again, the
and the LCD displays "HI" (vibration at HI level). Press
L or M to select the vibration level.
• HI (strong vibration level)
• LO (soft vibration level)
4. Press AL SET/SELECT once again, the
flashes and the LCD displays "HI". Press L or M to
select the alarm tone volume.
• LO (soft)
• HI (loud)
5. Press AL SET/SELECT once again or no button around
10 seconds to exit the alarm setting mode.
18
(See chapter "Helpline" for costs and hours of operation)
Helpline UK 0844 800 6503
indicator flashes
indicator