Panasonic AJ-YAC960P Installationsanleitung Seite 6

SDTI Interface Board
3 Attach the SDTI board to the SDI board in such a way that the connectors on the SDI board and
SDTI board are fitted precisely together.
4 Use the five screws removed in step 6 to attach the SDTI board to the SDI board.
<Notes>
≥ Wedge the excess length of the power cable between the SDTI board and SDI board.
≥ When installing the screws, take care not to drop them inside the VTR.
SDTI board
SDI board
E-5
Fit the connectors together here.
Screws (x5)