SATA_POWER1: SATA Power Connector
This connector is used to provide power to SATA device. Please use a SATA power
cable connect onboard SATA power connector with SATA device' s power connector.
SATA1~2: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one
SATA device.
Important
Please do not fold the SATA cable at a 90-degree angle. Data loss may result during
y
transmission otherwise.
SATA cables have identical plugs on either sides of the cable. However, it is
y
recommended that the flat connector be connected to the motherboard for space
saving purposes.
M2_1: M.2 Slot (Key M)
Please install the M.2 solid-state drive (SSD) into the M.2 slot as shown below.
1
3
2
Important
Intel
RST only supports PCIe M.2 SSD with UEFI ROM, does not support Legacy
®
ROM.
SATA1
4
30°
SATA2
5
Overview of Components
9