Connect Power - Philips DS9800W Benutzerhandbuch

Connect power

Caution
•
Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed on
the bottom of the unit.
•
Risk of electric shock! When you unplug the AC
power cord, always pull the plug from the socket.
Never pull the cord.
•
Before connecting the AC power cord, make sure
that you have completed all the other connections.
Connect power to speakers
• Connect the AC power cord to
• the ~ AC IN socket on the back of
the main speaker.
• the wall power socket.
• It takes about 35 seconds for the
speakers to boot up. During boot-up,
the LED indicator on the back of the
main speaker blinks in green quickly.
• After boot-up, the LED indicator
starts to blink in green slowly.
10 EN
Connect power to standalone
docking charger (optional)
• To charge your iPod/iPhone/iPad, connect
the AC power cord to
• the ~ DC IN socket on the docking
charger.
• the wall power socket.
Switch to standby
The unit switches on automatically after
power connection.
• To switch the unit to standby mode, press
on the back of the main speaker.
• To switch the unit on from the standby
mode, press
ON/OFF
again.