Prepare; Connect - Philips DS9800W Benutzerhandbuch

3 Prepare

Always follow the instructions in this chapter
in sequence.

Connect

Connect speaker cables
Note
•
Insert the stripped portion of each speaker wire into
the socket completely.
•
For optimal sound, use the supplied speakers only.
1
Unscrew the speaker connectors.
2
Insert fully the end of a speaker cable
with red mark into the left red (+)
connector.
3
Screw the left red (+) connector to
secure the cable.
4
Insert fully the end of a speaker cable
without red mark into the left black (-)
connector.
1 2 3
5
Screw the left black (-) connector to
secure the cable.
6
Repeat steps 2-5 to insert the other
speaker cable into the right connectors.
Connect an audio player (optional)
You can also listen to an external audio player
through the SoundSphere speakers.
MP3-LINK
• Connect the supplied MP3 link cable to:
• the MP3-LINK jack (3.5mm) on the
back of the main speaker.
• the headphone jack on an external
audio player.
Note
•
To play audio from the connected audio player, first
press to select the MP3 link source.
EN 9