Eibenstock BST 250 Originalbetriebsanleitung Seite 18

Declaration of Conformity
It is necessary that the machine (f. e. EBM 250/2 RP) used in this drill rig comply
with the requirements which are described in the specifications of the drill rig (f. e.
drilling diameter, fixture of the motor).
We declare that this unit has been designed in compliance with 2006/42/EC.
This unit must not be put into service until it was established that the Power Tool to
be connected to this unit is in compliance with 2006/42/EC (identified by the CE-
marking on the Power Tool).
Vakuum Technik GmbH Eibenstock
Lothar Lässig
13.01.2012
18