General Rules And Directions; Introduction; Description Of Machine; Normative References - GFC JOLLY Gebrauchs- Und Wartungsanleitung

di gianfranco conti - 20021 Bollate (MI) ITALY - Viale Lombardia, 18 - Telefono 02 38302386 r.a. - Telefax 02 38302389

1 - GENERAL RULES AND DIRECTIONS

1.1 - Introduction

The present manual belongs to GFC - Bollate. The contents of this document may not be reproduced
or assigned to third parties. All rights reserved.

1.2 - Description of machine

The instrument is a device for initialling control of values of multi-focal lenses, together with control
of optical quality of assemblies.

1.3 - Normative references

1.3.1- Compulsory set of rules

- EEC directive no. 73/23 - Low Tension (DBT) (Law no. 791/1977, Law Decree no. 626/1996, Law
Decree no. 277/97).
- EEC directive no. 89/336 relative to Electromagnetic Compatibility (EMC) - (Law Decree no.
615/1996).
- Law Decree no. 547 dated 27.4.1955 "Rules for prevention of industrial accidents".

1.3.2- Additional voluntary set of rules

EN 292 (1992) Safety of machinery - Fundamental concepts, general design principals - First Part -
Basic Terminology and Methodology (EN 292-1)/Second Part - Technical specifications and prin-
cipals (EN 292-2).
EN 60204-1 (1998) Safety of machinery - Electrical equipment - Part 1. General requisites
(Revision of EN 60204-1).

1.4 - Pre-arrangements to be carried out by client

The user installs the JOLLY machine in a suitable surroundings equipped with an electrical system
corresponding to the rules in force.
Machine must be installed in well-ventilated, dry and illuminated environments, in compliance with
the current law.
1.5 - Instructions for the request of interventions and spare parts
For any operation of electric maintenance, contact GFC of Bollate, Viale Lombardia, 18 or an
Authorized Assistance Centre.
In case of anomalies, damage etc., give specific indication of defect encountered to GFC techni-
cians or other authorized technicians.
ENGLISH Rev. 0/00 Pag. 4 di 9