Safe Handling; Product Description; Scope Of Supply - Aesculap Suhl Favorita II Gebrauchsanweisung

1.

Safe handling

Risk death by electric shock!
Do not open the product.
Connect the product only to a
DANGER
grounded power supply.
Prior to use, check that the product is in good
working order.
Observe our ‚"Notes on Electromagnetic Compati-
bility (EMC)‚".
To prevent damage caused by improper setup or
operation, and in order not to compromise war-
ranty and manufacturer liability:
– Use the product only according to these instruc-
tions for use.
– Follow the safety and maintenance instructions.
– Ensure the manufacturer's approval before using
accessories that are not mentioned in the instruc-
tions for use.
Ensure that the product and its accessories are
operated and used only by persons with the requi-
site training, knowledge, or experience.
Keep the instructions for use accessible for the
user.
Always adhere to applicable standards.
Ensure that the electrical facilities in the room in
which the device is being used conform to IEC
norms.
Unplug the device by pulling the plug, but never by
pulling the power cord.
Do not operate the product in explosion-hazard
areas.
Do not use the product if it is damaged or defec-
tive. Set aside the product if it is damaged.
Note
The device can be used by children over the age of 8 as
well as by persons with reduced physical, sensory or
mental capacities or with lack of experience and
knowledge, if these persons are supervised or have been
instructed on how to use the device safely, and if they
understand the risks associated with the use of the
device.
Do not allow children to play with the device.
Do not allow children to carry out cleaning and
maintenance of the device without supervision.
2.

Product description

2.1 Scope of Supply

Designation
Shearing machine Favorita II
– 110 V to 125 V
– 230 V
Shearing machine Favorita Speed
– 230 V
Shearing machine Electra® II
– 110 V to 125 V
– 230 V
Shearing machine Ehmann turbo-line®
– 230 V
Instructions for use
Note
The device ships without any blade. Instead, there is a
range of blades available for various applications!
Art. no.
GT101
GT104
GT114
GH201
GH204
GH214
TA009813
3