Charging Instructions; Specification - i-tec Aduance Serie Gebrauchsanweisung

i-tec Car Charger USB High Power 2.1A
INTRODUCTION
Standard input DC 12V - 24V can be used in car, ship and air plane. Outputs 2x USB DC 5V / 0.5A -
2.1A allows wide use with cell phones, tablets, MP3 / MP4, cameras and other digital devices. Over-
current protection and constant charging current ensures safe use.

CHARGING INSTRUCTIONS

Plug the adapter into a 12V / 24V power outlet: LED lights up.
Ÿ
Outputs 2x A-type USB DC 5V / 0.5A – 2.1A you can use for different digital devices.
Ÿ
Adapter can charge two iPads / two Samsung tablets at the same time.
Ÿ

SPECIFICATION

Input: DC 12V - 24V / max. 10W
Ÿ
Output: 2x A-type USB DC 5V/ 0.5A – 2.1A
Ÿ
LED indicates the working status
Ÿ
Off-load: < 0.5W
Ÿ
Noise & Ripple: < 50mV
Ÿ
Insulating resistance: max. 100MOhm (measured with the voltage of 500V)
Ÿ
Operation temperature: 0 - 35 °C
Ÿ
Compatible charging devices – devices which need 5V / max. 2.1A
Ÿ
CAUTIONS
Use adapter according instructions to avoid its damage.
Ÿ
Don't disassemble, reassemble the charger.
Ÿ
Keep away from humidity and heat surrounding.
Ÿ
Pay attention to right connection of voltage, current and power of the adapter with the devices.
Ÿ
Unplug the adapter when not in use.
Ÿ
The charger should be kept out of children's touch.
Ÿ
FAQ
Question: LED not lights, where is the problem?
Answer: Be sure that the adapter is correctly inserted to the car socket. Make sure the car socket is
functional.
Question: Is possible to charge 2 iPads / 2 Samsung tablets at the same time?
Answer: Yes, it is possible. For iPad / Samsung tablet you can use any USB output.
Question: Is it possible to charge iPad / Samsung tablet at the same time?
Answer: Yes, it is possible.
EN
03