ASROCK Q87M vPro Handbuch Seite 5

* here are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED
Status
Of
Blinking
On
To enable Multi-Streaming, you need to connect a front panel audio cable to the front
panel audio header. Ater restarting your computer, you will ind the "Mixer" tool on your
system. Please select "Mixer ToolBox"
click "ok". Choose "2CH", "4CH", "6CH", or "8CH" and then you are allowed to select
"Realtek HDA Primary output" to use the Rear Speaker, Central/Bass, and Front Speaker,
or select "Realtek HDA Audio 2nd output" to use the front panel audio.
4
Description
No Link
Data Activity
Link
Speed LED
Status Description
Of 10Mbps connection
Orange 100Mbps connection
Green 1Gbps connection
, click "Enable playback multi-streaming", and