Using Data Service - Samsung ue40b8100 Bedienungsanleitung

PQRS TUV WXYZ

Using Data Service

¦
1
BACK
,.;@
2 ABC
Auto Run Data Service → On / Off
■
Sets whether or not to automatically run data service. Auto Run Data Service automatically
GHI JKL
runs data service without user intervention.
OK 1
PQRS TUV
If any other secondary function is under way, Auto Run Data Service may not work.
N
2
Display Duration → 2 hours / 4 hours / 8 hours / 10 hours / Off
■
3
Prolonged display of the same data service screen may leave ghost images on the LED
4
1
screen. To prevent such permanent ghost images, set the display duration.
The above problem is not included in the warranty coverage. For screen protection, an
N
2
alarm banner will show up and the data service screen will disappear if your remote control
1
3
has not been used for a certain amount of time after data service started. The data service screen will reappear if you press
TEXT
4
5
any button on the remote control while the banner is displayed and/or if you press one of the data service-related buttons
OK
2
( button, Colour buttons) after the data service screen has disappeared.
6
Using Data Service
3
5
4
If the channel you are currently watching provides data service, you can enjoy a variety of data
,.;@
ABC DEF
services by pressing the
6
Provided Data Service information may vary depending on broadcast.
GHI JKL MNO
N 3
4
While using data service, changing the channel using the numeric buttons may not be
N
PQRS TUV WXYZ
TEXT
possible depending on the service.
5
1. Press the button. Select a desired service by pressing the wheel (▲/▼/◄/►) and
6
OkE buttons.
5
If Auto Run Data Service is On, the data service will automatically run with loading
1
N
BACK
banner. In this case, the
6
2
2. Press the red button. The data service screen will be displayed.
3. Move to a desired option by pressing the wheel (▲/▼/◄/►) button on the data service
OK
screen and then press OkE. The selected service will be started.
If a Colour button of a certain function appears on the screen, you can use the offered
N
function by pressing the corresponded button.
3
2. If you press EXIT button, data service will be closed.
4
Main Data Service buttons and their functions
TEXT Button
5
(Data Service)
6
BackR
Colour Button
Symbol
TEXT
Wheel (▲/▼/◄/►)
OkE
EXIT e
7
,.;@ ABC DEF
8
GHI JKL MNO
9
PQRS TUV WXYZ
7
0 DEF
8
MNO
7
9
,.;@
ABC DEF
WXYZ
BACK
!
0
GHI JKL MNO
8
PQRS TUV WXYZ
9
OK
@
BACK
8
!
0
9
#
BACK
@
0
!
#
OK
TEXT 7
!
@
or red button.
#
@
8
#
9 TEXT
button does not work.
0
!
@
#
Displays the Data Service list and immediately starts Data Service.
Returns to the previous screen.
Perform functions corresponding to each Colour button image displayed on the screen during Data
Service.
Operations may differ depending on the service provider.
N
Text can be inputted using the numbers and letters printed on and above the numeric keys on
the remote control. If you input the numeric keys on the remote control one by one into the blank
where the cursor is located on the text input screen, the corresponding lettering, numbers or special
characters will be displayed.
e.g., If you press the number 3 key in rapid succession, then the assigned letters (D, E, and F) and
the number 3 will alternately appear in order of input.
Switches to teletext mode or Returns to the previous screen.
Operations may differ depending on the service provider.
N
Moves the Data Service menu up, down, left and right.
Runs a selected item.
Stops a running Data Service.
English - 2
loading
Operation
,.;@ ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
Language
Subtitle
Data Service ▶
BACK
Security
Network
General
PIP
Common Interface
OK
TEXT
Data Service

EPG_Dati
LauncherC5I1R4
PARSEDDALTRE
PARSEDULTIMISSIME07
