Werbung
WARNING
Disconnect the desktop board's power supply from its AC power source before you connect or disconnect cables, or
install or remove any board components. Failure to do this can result in personal injury or equipment damage. Some
circuitry on the desktop board can continue to operate even though the front panel power switch is off.
CAUTION
Electrostatic discharge (ESD) can damage desktop board components. Install the board at an ESD-controlled workstation. If such
a workstation is not available, wear an antistatic wrist strap or touch the surface of the antistatic package before handling the board.
Safety and Regulatory Notice
®
See the Intel
Desktop Board Product Guide for all applicable regulatory compliance statements, product certification markings,
and safety and electromagnetic compatibility (EMC) standards and regulations the desktop board is compliant with.
Replacement battery warning label provided: Place the label inside the chassis in an easy-to-see location near the battery but
not on the board itself.
Intended uses: This product was evaluated as information technology equipment (ITE) for home or office use when installed
into an appropriate computer chassis. Other end uses or locations may require further evaluation.
Processor Support
®
®
Intel
Pentium
4 processor (LGA775) with 1066 MHz or 800 MHz front side bus support
Memory Support
DDR2 533 MHz and DDR2 400 MHz
For more information about processor and memory support, go to http://support.intel.com/support/motherboards/desktop/.
(ESD)
Intel
1066 MHz
DDR2 533
Intel Desktop Board D925XECV2/D925XEBC2 Quick Reference
ESD
®
800 MHz
(FSB)
DDR2 400
,
:
http://support.intel.com/support/motherboards/desktop/
(EMC)
(ITE)
Intel Pentium 4 (LGA775)
5
Werbung
