Tips 17 - Gastro M C-800 Installationsanleitung

For having best performance of your icemaker, you should clean
once a month its condenser, mostly in summer time. The condenser is
behind the front cover. Clean it with UP and DOWN movements ONLY!!
Do not supply your icemaker with water from a tanker, which is exposed
to the sun.
For cleaning the water storage, distributor and sprayers:
First lift off the top cover, then take of the door. Now pull up the
white flags. Behind the flags is the water storage. Take off the sliding
conveyor. Place your hands down of distributor and lift it first. Rotate it
60' and pull it out gently in such way, so you will disconnect the
distributors pipe from pumps pipe. Now you can clean the icemaker.
Please also consider the sprayers, which are on distributor. Take them off
and clean them by brushing with toothbrush or mix water vinegar. Be
careful when you are going to connect them in the distributor, you must
put in such way to be parallel in to each other.
For having a quick cleaning of your icemaker just poor mix of
water vinegar in water storage, then connect with 1.2 m Φ1/2' pipe the
white hose you disconnect before the distributor. The other side of the
long pipe places it in water storage. Now start the icemaker. Leave for 10
min and then stop it. After that, wash the water storage with water and
then dry it. Connect everything from last piece to first. And place the
machine into function again
Then icemaker has been designed for producing ice and not as
storage to preserve fruits or bottles or in general to preserve foods,
drinks. For example leaves from fruit or etiquettes from bottles could
obstruct the drainage system.
In situation of malfunction of your icemaker, first refer to trouble
shootings. If nothing performed after troubleshooting guiding, please ask
for assistance by authorized personnel.
We suggest installing before inlet of water a softener in case the
supplied water in hard. The softener could be a mechanical filter.
TIPS
17