i-tec USB 2.0 Fast Ethernet Adapter Benutzerhandbuch Seite 9

Windows Operating System
1. Insert the provided CD into your disc drive. Locate and double-click <Setup.exe> to
launch the setup procedure. Or you can download the drivers on
www.i-tec-europe.eu.
2. Wait for the program to install the drivers.
3. Click <Finish> to complete the installation.
Note: Drivers in Windows 8 OS are included for this product, you connect its to USB
port – see on point "Connection to a PC/NB"
Mac Operating System
1. Insert the provided CD into your disc drive. Locate and double-click
<AX88179....pkg> to launch the setup procedure.
2. Click the <Continue to install> and it will restart your computer automatically.
Connection to a PC/NB
Connect the adapter to an available network when the installation procedure is
completed.
1. Connect an Ethernet cable to the Ethernet port of the adapter, and then connect
the other end of the Ethernet cable to an available network hub, switch or router.
2. Connect the USB connector of the adapter to a free USB port of computer. Then a
pop-up message will appear in the notification area indicating the installation is
completed.
Note: The Link LED should light up in yellow to indicate a proper physical connection
between the adapter and the network. If the Link LED doesn't light up, please verify
4