Eu Declaration Of Conformity; Safety Instructions; Intended Use - IKA M 20 Universal mill Betriebsanleitung

Source language: German
Contents

EU Declaration of conformity

Safety instructions

Intended use

Unpacking
Commissioning
Motor circuit breaker
Description
Grinding
Grinding while cooling
Replacing the grinding tool
Maintenance and cleaning
Accessories
Warranty
Technical data
EU Declaration of conformity
We declare under our sole responsibility that this product corre-
sponds to the directives 2014/35/EU, 2006/42/EC, 2014/30/EU and
2011/65 EU and conforms with the following standards or normative
documents: EN 61010-1, EN 61010-2-051, EN ISO 12100, EN 61326-1
and EN 60529.
A copy of the complete EU Declaration of conformity can be request-
ed at sales@ika.com.
EN
Safety instructions
Page • Read the operating instructions in full before starting up
7 and follow the safety instructions.
7 • Follow the safety instructions, guidelines, occupational health and
7 safety and accident prevention regulations.
8 • Keep the operating instructions in a place where they can be ac-
8 cessed by everyone.
8 • Ensure that only trained staff work with the appliance.
• The device must only be used in a technically perfect condition.
8
• The M 20 device may not be used in areas subject to explosion
8
hazards.
9
• Protective glasses must be worn when performing experimental
9
cuts. In addition, suitable protective gloves must be worn when
9
adding coolants.
10
10 • Experiments involving grinding must be performed behind a pro-
10 tective wall (Plexiglas -wall, exhaust hood or the like) in order to
®
prevent injury caused by the sudden occurrence of excess pressure
(possible bursting of the cover).
• Please comply with all of the relevant safety regulations.
Intended use
IKA universal grinder M 20 is suitable for carrying out low-loss grind-
ing of hard and brittle substances as of grain size 6 - 7 mm. The
grinders operate without creating dust or lost. Beaters, blades and
grinding are replaceable. The useful volume of the grinding chamber
is 250 ml for the M 20 grinder.
Hard and brittle ground material is crushed by means of beaters or
blades rotating at high speed.
Oil substances or those that are given to smearing and which are
not capable of being ground at room temperature have to be cooled
for grinding (e.g. embrittled with liquid nitrogen).
7