Identification Of Parts; How To Use; How To Clean - Afk SM-400P.2L Bedienungsanleitung

17.
Keep the appliance and its cord out of reach of children less than 8 years."
The appliance is not intended to be operated by means of an external timer
18.
or separate remote-control system.
19. The appliance is for indoor use only.

Identification of parts

1. Lid stopper
2. Lid
3. jug
4. Cutting assembly
5. Motor housing
6. Control switch (P - 0-1-2)

How to use

1. Place the container jug on the motor housing, then slightly twist it anti-
clockwise until it is locked.
2. Put the products for missing into the jug after dicing them, then add the
liquid, making sure not to go over the maximum level marked on the jug.
3. Put the lid on the jug, and put the lid stopper on the lid, then clip it on.
4. Put in the appliance and set the control switch to
5. Turn the appliance off by setting the control switch to " 0 ", wait until the
appliance has completely stopped before removing the jug.
6. Remove the jug by twisting it in the clockwise direction.

How to clean

1. After usage, you can clean the jug by using the
2. Pour a little lukewarm water into the jug.
3. Choose the
4. Remove the jug and rinse under running water.
5. Wipe clean the motor housing with a damp cloth; never immerse in water.
"P(PULSE)" setting for a few seconds.
Plas Pl Plastic grinding cup asti t c g gr i i ndi ding g c c up up
1
3
4
5
"0""1""2" or "P"(PULSE)
"P(PULSE)" setting.
2
6