Parts List; Technical Specifications - Athena JumpStarter Bedienungsanleitung

How to recharge mobile phones or tablets:
1. Connect the charger cable to the device's USB 5V 2.4 A port.
2. Select the appropriate connector and connect it to your mobile phone or tablet.
3.Press the button on the switch to charge.
LED flashlight
Press the switch for 3 seconds to switch the torch on. Press the switch again to turn the torch off.
C. PARTS LIST:
# Part Name
1 Host
2 Switch cable
D. TECHNICAL SPECIFICATIONS:
Size:
Weight:
Battery Capacity:
Output:
Input:
Full charging time:
Starting current:
Peak current:
Operating temperature:
Quantity #
1 3 Cable with Intelligent clips
1 4
5
Parts Name
User manual
150 x 79 x14 mm
190g
4000 mAh (14.8Wh)
5V 2.4A ; 12V Jump Start
5V 2A
About 2 hours
200A
400A
-20ºC ~ 60ºC
Quantity
1
1
EN