Mounting The Hood Body - NEFF D96W44N0 Gebrauchs- Und Montageanleitung

ance after removal of the ilterframe.

Mounting the hood body

Before undertaking any repairs,
9. Fully tighten support screws
10. Adjust screws
��
���
hood to the chimney using either a lexible or rigid
they are lush with the wall.
pipe ø 150 or 120 mm, the choice of which is left to
q To install a ø 120 mm air exhaust connection,
insert the reducer lange
q Fix the pipe in position using suficient pipe
�����
�����
�
q Remove charcoal ilters, if present.
that are going to be itted.