Velleman CAMCOLMS2 Bedienungsanleitung Seite 11

CAMCOLMS2
Modifying Calibration
Click the calibration icon and go to Reset Magnification > Reset Picture Magnification. Reset the
calibration as described above.
Change the magnification rate and capture several pictures. Double-click on the picture to enter the
measurement interface.
Click the calibration icon and go to Set Magnification > Set Picture Magnification.
Enter the magnification rate and confirm with OK.
To use the same magnification rate to capture pictures, click the calibration icon and go to Set
Magnification > Set Capture Magnification. Now, all pictures will use the same magnification rate and you
can start measuring directly.
V. 01 – 20/09/2016 11 ©Velleman nv