Cleaning And Storage - Gima 28180 Bedienungsanleitung

7
6. If required, place a label on the container for transportation to the laboratory.

5. Cleaning and Storage

Disinfect the pump and handle (by scrubbing with warm soapy water, mild de-
tergent, bleach solution etc.) before placing into storage.
The pump requires no special maintenance or storage conditions.
6. Testing for correct function
Check the handle's condition and the pump function before returning it to ser-
vice. Mount a container, occlude the suction port by thumb and pull or squeeze
the pump handle to check for the vacuum.
This product includes a suction main body, adapter, container and each 10mm
and 6mm sucker.
7. Caution
1. It is important to read the manual carefully before operate.
2. If the pump handle becomes difficult to operate, a blockage may have oc-
curred. Do not continue suctioning until the source of the blockage has been
determined (remove the blockage from the catheter, the adapter or the cap).
3. If the pump is turned upside down, the overfill protection mechanism will be
engaged making it impossible to suction.
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
ENGLISH