Kit Content - Extel WAPP-G8S Bedienungsanleitung

KIT CONTENT

Wireless Appcam Camera Stant
SETUP THE CAMERA
1. APP DOWNLOAD
Download the APP from APP Store/Google Play.
APP name: OMGuard HD
2. Power up the camera
When GREEN LED starts a repeat cycle of one
camera is ready for Direct Wireless Connection.
Normally it takes less than 1 minute.
3a. Direct Wireless Connection
1. Go to the Wi-Fi setting on your mobile device.
Enter the default password 12345678 and save the settings.
2. From the APP, tap the „ADD Camera"
then „search" icon. The camera ID will show up. Enter
the default password 123456 and save the settings.
success fully established. You'll see the camera view right
now. Please go on to Step 4.
3b. You can also establish a connection via Ethernet cable.
1. Connect your mobile device to your home router. Connect camera to your
40 seconds to connect to router, when done, Green LED will stay ON.
2. From the APP, tap the "Search" button to locate the camera. Enter the default
password 123456. Then save the settings.
GB1
Antenna Power Adapter
CFI EXTEL O'OUT HD - 01/2015
Screw Connector RJ45
and
Quick Start Guide