Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
TO SIMPLIFY THE HANDLING OF NAVIGO,
WE HAVE CREATED A BRIEF SUMMARY OF ITS FUNCTIONS FOR YOU.
NOTE! YOU SHOULD MAKE ALL THE ADJUSTMENTS WHILE SITTING.
1. Mechanism
To lock the backrest inclination
angle in a chosen position, press
the lever located on the left-hand
side underneath the seat. To release
the synchronous mechanism and
achieve the effect of dynamic
sitting, pull up the lever. Note:
dynamic sitting, which means sitting
when a mechanism is released, is
optimal for the user's health.
2. Seat height adjustment
To adjust the seat height, pull up
the lever located on the right-hand
side underneath the seat. Note:
Pneumatic lifts can be installed and
serviced only by trained personnel.
3. Seat depth adjustment (option)
To adjust the seat depth, pull up
the smaller lever located on the
right-hand side underneath the seat.
Then move the seat to the desired
position and release the lever. The
seat will be locked in this position.
4. Weight adjustment
To adjust the backrest resistance
force, turn the knob located in
the centre underneath the seat
clockwise (the backrest resistance
force will decrease) or counter-
clockwise (the backrest resistance
force will increase). This adjustment
should be made when the backrest
is released.
5. Armrest adjustment (option)
• 2-D ARMRESTS (option)
To adjust the armrest height,
press the button located on the
outer side of the armrest. To adjust
the armrest width, release the
locking lever located underneath
the armrest, then move the armrest
to the desired position and lock
the lever.
• 3-D ARMRESTS (option)
To adjust the armrest height, press
the button located on the outer side
of the armrest. To adjust the armrest
pad angle, turn it to the inside or
outside of the chair to the desired
position. To adjust the armrest pad
depth, move it forward or backward
to the desired position.
• 4-D ARMRESTS (option)
To adjust the armrest height, press
the button located on the outer side
of the armrest. To adjust the armrest
pad angle, turn it to the inside or
outside of the chair to the desired
position. To adjust the armrest pad
depth, move it forward or backward
to the desired position. To adjust
the armrest width, release the
locking lever located underneath the
armrest, then move it to the desired
position and lock the lever.
6. Lumbar support adjustment
(option)
• DEPTH ADJUSTMENT
(upholstered backrest): adjust depth
lumbar support by using the "+"
(increase lumbar support) or "-"
(decrease lumbar support) buttons
located on the right-hand side of the
front part of the backrest.
Werbung
