Drinking Water Withdrawal; Troubleshooting - Vision Aqua VA-H-FT-DF-1000-20-1 Gebrauchsanleitung

5.2 Drinking water withdrawal

Please open the withdrawal tap.
If the system is in standby mode for more than 15 minutes, you will receive the drinking water only after
approx. 15 - 30 seconds. During this time the filter is rinsed and prepares itself for ultra-pure water pro-
duction..
The following messages appear on the display:
PERMEATE PRODUCTION
Membrane rinse
ESC ←
After rinsing the filter automatically changes to ulta-pure water production. The following messages appe-
ar on the display:
Permeate Production
device in operation
ESC ←
In order to stop ultra-pure water production close the withdrawal tap.
After the water production is finished, the system prepares for standby mode. The following messages
appear on the display:
PERMEATE PRODUCTION
rinsing
ESC ←
The RO-Water filter is now in standby mode.
6. Trouble shooting
Most faults and errors that can occur in daily operations can be rectified by yourself. In many cases
you will be able to save time and cost as you do not have to call technical service.
The following table is intended to help you understanding the causes of an error and how to rectify it.
46
080%
050%
Instruction Manual – VA-H-FT-DF-1000-20-1 – V.1.2 – 09.2019
PERMEATE PRODUCTION
Automatic
PERMEATE PRODUCTION
Automatic
Permeat rinse
ESC ←
device in operation
ESC ←
030%