Installation - Wolf-Technik WTHKE Serie Bedienungsanleitung

14

3. Installation

Dimensions for in-/outlet
configuration „SU"
Dimensions for in-/outlet configuration „SU"
Type Cartridges
03WTHKE10 3x10" Ø73
03WTHKE20 3x20" Ø73
03WTHKE30 3x30" Ø73
03WTHKE40 3x40" Ø73
05WTHKE20 5x20" Ø73
05WTHKE30 5x30" Ø73
05WTHKE40 5x40" Ø73
07WTHKE20 7x20" Ø73
07WTHKE30 7x30" Ø73
07WTHKE40 7x40" Ø73
The filter housing has to be installed in a standing
position, so that the pipe connections for inlet and
outlet are located horizontal and the cover with the
ring nuts is at the top. The lower connection is the
inlet, the upper connection is the outlet. The inlet line
has to be connected to the inlet, the outlet line to
the outlet. For tight sealing we recommend a PTFE
sealing tape or a sealing paste suitable for medium
and application. The versions with flanged connec-
tions have to be installed with a gasket suit-able for
pressure temperature and medium.
For controlling and monitoring the filter pressure
drop for filter exchange it is recommended to install
In/ Out A B
185 225
185 225
DN40
185 225
185 225
210 265
DN50 210 265
210 265
240 300
DN65 240 300
240 300
pressure gauges and shut off valves in front of
and behind the filter housing. For draining the filter
housing the drain plugs can be replaced by suitable
ball valves. The vent plugs of the housing can also be
replaced by suitable ball valves.
Filter housings are delivered without filter elements!
The selection of the filter elements depends on the
application and a precise specification can not be
made in advance. The first equipment and exchange
of filter cartridges should only be made with filter
cartridges recommended by us, or with filter cart-
ridges suitable for medium, pressure, temperature
and application
øD1 øD1 E
219,1 240 530
219,1 240 785
219,1 240 1040
219,1 240 1295
273 290 810
273 290 1065
273 290 1320
323,9 345 825
323,9 345 1080
323,9 345 1335
F G
575 660
830 915
1085 1170
1340 1425
860 945
1115 1200
1370 1455
885 970
1140 1225
1395 1480