Description; Technical Data - Wolf-Technik WTHKE Serie Bedienungsanleitung

1. Description

2. Technical
Data
WTHKE Stainless Steel Cartridge Filter Housing
with hangig cartridges
WTHKE Stainless Steel Cartridge Filter Housings with hangig cartridges are run
through in vertical direction from the bottom to the top.The hanging cartridges
are mounted to an adapter with a handle and can be installed and pulled out
individually. This construction makes sure, that in special during filter exchange
no pollutions can go from the unfiltered inlet side to the clean outlet side.
WTHKE-Cartridge Filter Housings are manufactured in different assebly sizes.
The assembly sizes differ from one another in the amount and length of filter
cartridges that can be built inside. So there can be built in 3, 5 or 7 filter cart-
ridges in the length from 10" to 40" inside of a housing.
WTHKE-Cartridge Filter Housings are provided with the well-proved hinged
cover made from casted stainless steel. This offers additional comfort by
its easy handling. An other important feature of the WTHKE-Cartridge Filter
Housings is the fact, that the position, type and size of the inlet and outlet
connections are variable and are only manufactured at time of and according to
customer specification. WTHKE-Cartridge filter housings can be supplied with
filter cartridges with double open end ( DOE ) or with adapter and endcap with
fin ( Code 5 ). Options for all sizes is a pressure-gauge-vent-unit. For installation
of the WTHKE-Cartridge Filter Housings three welded legs or the innovative,
space-saving socket can be used.
Material: Housing:
In- / Outlet: Position, type and size according to customer
Vent: 2 x ¼" internal thread
Drain: ½" internal thread ( except version „SU")
Filter cartridges: Amount and length see table
Differential pressure: see data sheet of the filter cartridges
Pressure: max. 10bar
Temperature: max. 95°C
Flow rate: The maximum flow rate correlates to the nominal
Stainless steel 1.4404/1.4571
Installations: Stainless steel 1.4404/1.4571
O-rings: Viton ( optional Viton-FEP-encapsulated,
EPDM, Silicone )
Screw:
specification
diameter of the housing connection and the
characteristic curve of the flow rate of the chosen
filter element.
13