Menu Installation; Antenna Connection; Satellite List - Avanit SHD5 Bedienungsanleitung

¾ Press the blue L/R key to return to the sub-menu Favorite and press EXIT to
leave the sub-menu.

7.2 Menu Installation

The default settings apply to a standard satellite system. Any further system func-
tions (e.g. unicable system or motor antenna) should be manually set in the menu
Installation:
¾ In case of doubt, have those settings being made by an expert.
CAUTION!
7.2.1

Antenna Connection

1. In the menu Installation, select the submenu Antenna Connection and con-
firm by pressing OK.
2. Select by using the keys /
tenna is connected to the receiver.
3. Press EXIT to leave the submenu Antenna Connection.
4. Press EXIT again to leave the menu Installation and to return to TV operation,
or go to another submenu.
)
If you selected a Motor Antenna, then such antenna should be
further configured at the menu item Antenna Setup.
7.2.2

Satellite List

The submenu Satellite List states a preset list of possible satellites. Depending on
your antenna system you can select the satellites used for receiving channels:
1. In the menu Installation, select the submenu Satellite List and confirm by
pressing OK
2. Select the satellite you want to receive by pressing the keys
PR-, and confirm by pressing OK.
The selected satellite will be correspondingly marked ( ).
AVANIT SHD5
Usually, there are no required settings within scope of normal
use of the system.
and /
Extended Settings and Functions
if a Fixed Antenna or a Motor An-
/ PR+ and /
125