Audio Settings - Avanit SHD5 Bedienungsanleitung

¾ Press the red function key to access
the window Time:
x Here, select the function on the
bottom by using the keys /
and / :
¾ Press OK when
gram is marked with
¾ Press OK when
¾ Press OK when
¾ Press OK when
¾ Press OK when
return to the EPG window.
¾ Press the green function key to include channel, recording date, switch-on
time and duration of the marked program into a timer. The Timer Mode is set to
Once by default; Timer Service is set to Record. You may change settings as
described in section 7.3.2, page 133.
¾ Press the blue function key to leave the EPG window and return to the window
Single EPG.
¾ Press the EXIT key to leave the EPG window and return to the TV program.
5.8.6

Audio Settings

1. Press the key AUDIO.
2. Select the audio mode by using the keys /
Depending on the selected channel and the current program, the following
modes are available: Left - Right - Stereo - Mono.
3. Press the keys
(Dolby Digital) as far as provided by the TV station.
4. After selecting the desired audio mode, leave the menu by pressing the EXIT
key.
AVANIT SHD5
is selected to go to the current program. The current pro-
.
is selected to go one program forward or back.
is selected to go two hours forward or back.
is selected to go one day forward or back.
is selected or press EXIT to close the window Time and to
/ PR+ or / PR- to select another language or Dolby AC3
Basic Operation
and / .
115