Retevis RT649 Bedienungsanleitung Seite 10

4. The radio will resume scrolling through the
channels five seconds after the end of any
received activity.
5. To stop scanning, briefly press the
Scanning Notes:
1. If you press the PTT button while the radio
is scrolling through inactive channels, the
transmission will be on the" home channel".
Scanning will resume 5 seconds after the end
of your transmission. You may press the
button to stop scanning at any time.
2. If the radio stops on an undesired
transmission, you may immediately resume
the scan by briefly pressing
3. If the radio repeatedly stops on an undesired
transmission, you may temporarily remove
that channel from the scan list by pressing
and holding or
remove more than one channel in this way.
4. To restore the removed channel(s) to the scan
list, turn the radio off and then turn back on,
or exit and re-enter the scanning mode by
pressing button.
5. You cannot remove the home channel from
the scan list.
LED Lamp
Your radio has a built-in-LED Lamp.
button.
or button.
for 3 seconds. You may
Briefly press the button once to ON the lamp,
press again to OFF the lamp.
Automatic Power Save
For better battery life, your radio is designed to
switch to Power Save mode when it has been
no transmissions after 5 seconds. The radio can
receive transmissions in this mode.
CHANNEL AND
FREQUENCIES
Model RT649
Channe
1
2
3
4
5
6
7
8
9
EN- 8
Frequency Max Power
(MHz)
446.00625
446.01875
446.03125
446.04375
446.05625
446.06875
446.08125
446.09375
446.10625
Output
0.5w
0.5w
0.5w
0.5w
0.5w
0.5w
0.5w
0.5w
0.5w