AVer M15W Bedienungsanleitung Seite 6

Miracast Connection
1. Make sure M15W and display device (such as Interactive flat panel) are
at same Wi-Fi network and Wi-Fi is connected.
2. The display device needs to install a commercial Miracast Dongle such
as the one from Microsoft (Wireless Adapter).
3. On M15W, press
button to go to the selection and press
selection.
4. Please select "Wireless" > "Mode" > "Miracast" to enable Miracast
mode.
5. Then, press
device (The display devices will be list out).
6. Then, the camera image will display on the display device's screen.
Using the Camera
Storage the Camera
to enter selection menu. Using
back to menu and select "Miracast Setup" > display
English-5
button to confirm the
and