AVer M15W Bedienungsanleitung Seite 5

Power Connection and Charging

Please fully charge the camera for the first use.

When the camera is power on, the camera is in "Standby" mode. In
standby mode, it can be charging through the USB connection from
other device; but the power supply is required 5V2A and the charging
time will be longer.

The laptop, projector, or monitor cannot provide the power through the
USB connection to the camera while the camera is operating.

When the camera is charging through the wall outlet, the battery
indicator is in green flashing.

Press
camera back to standby mode.
Devices Connection
 The Wi-Fi mode is on when the camera is power-up.
 When camera connects to laptop through the USB port, the Wi-Fi mode
is disabled. Please follow the direction on HDMI device.
Wi-Fi Connection
1. Power on the camera.
2. Check the Wi-Fi status – Blue light on.
Wi-Fi Setup
Please download the user manual from below website:
https://www.aver.com/download-center
+ when the camera doesn't work properly. The
English-4