Led Indicator - AVer M15W Bedienungsanleitung

LED Indicator

Power
Wi-Fi
Battery
[Note]
1. The battery will be exhausted for long-term usage. Do not replace the
battery yourself. Please contact your dealer.
2. To complete turn off the camera,
off.
Compound Key
Press and hold for 3 seconds to operate the compound key function.
Press keys to operate the compound key function.
Solid green: Power on
No light: Power off
Solid red: Standby mode
Solid blue: AP Mode Ready / STA connected
Slow flashing blue: Software connection with camera
Short flashing blue: Create AP mode / STA
connecting
Solid green: Miracast mode ready
Slow flashing green: Miracast streaming start
Quick flashing green: Miracast device scan /
connecting
Solid green(x3): Battery is full(100% ~ 60%)
Solid green(x2): Battery is 60% ~ 30%
Solid green(x1): Battery is 30% ~ 5%
Solid red (x1): Battery is 5% ~ 0%
Flashing red (x1): Battery is out of power
Solid orange(x3): Battery is abnormal
: Display system information and battery power status.
: Snapshot the current screen image to software or
cloud.
: Back to factory default settings.
: Press to switch between following modes:
- Auto detects the best resolution(4K, 720P, 1080P)
- 1024x768 (If HDMI device support)
- 4K 60Hz (If HDMI device support)
:Press to switch between following modes:
- Normal: Adjust the gradient of image.
- Motion: Increase frame rate. Sufficient lighting is
required when using this mode.
- High quality: Better image quality.
press and hold the power button to turn
English-3