Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Remote control
Functions
Take the unit from the package.
1.
Connect the unit to the power outlet (220-240V~, 50-60Hz).
2.
Press the buttons on the control panel as follows:
3.
● POWER:
● SPEED:
● MODE:
● TIMER:
● OSC:
All functions can be enabled using the control panel or remote control.
4.
Cleaning and storage
•
Before cleaning the unit turn the power off by pressing the POWER button, wait a few minutes and then
unplug the power cord from the outlet.
•
Clean the unit using a damp cloth, and then wipe it using a dry cloth.
•
Do not use chemical solvents (such as gasoline, alcohol). The surface and the entire housing could be
damaged.
•
Gently remove the cover, then remove the air filter.
•
Rinse the filter under running water and dry it with a soft cloth.
•
We recommend cleaning the unit once a month.
•
If you don't use the unit for a longer time period, so please turn it off, unplug the power cord an take the
unit to a dry, cool and safe place.
•
Do not expose the unit to direct sunlight.
•
Remove the batteries from the remote control and keep them safe.
Press the button to turn the unit on or off.
Set the desirable fan speed (Hi, MED, LOW). The default speed is low.
Press the button to choose Normal (NM), Natural (NT) or Sleep mode (SL).
Press the button to activate the timer function (0,5h – 8h). The set time will appear on
LED Display. Continuously press the button for 3 seconds, the time will increase in
hours.
Press the button to activate or deactivate the oscillation of the fan.
Oscilation
Choose Normal (NM), Natural (NT) or Sleep
mode (SL)
Timer, up to 8 hours (0.5 hour per setting).
Continuously press the button for 3
seconds, the time will increase in hours.
Fan speed: HI, MED, LOW
On / Off
Werbung
