Werbung
Inserting the Batteries
The worklight is powered by four batteries of the type LR6
(AA).
1. Open the battery compartment and insert the batteries
into the battery compartment. Pay attention to the prop-
er polarity of the batteries, the symbols are shown in the
battery compartment.
2. Close the battery compartment with the cover. Replace
the batteries when the light intensity decreases.
Operation
1. Press the ON/OFF button at the rear side to switch on
the worklight with 100 % light intensity.
2. Press the ON/OFF button once more to change to
50 % light intensity.
3. Press the ON/OFF button again to change to flashing
light. Press the button again to switch off the light.
Using the Stand
The bracket can be fold out. Use
the foldable bracket as a stand or
for hanging the worklight on a
suitable place.
Cleaning and Storing
Clean the worklight only with a dry or lightly moistened
cloth. Do not use aggressive chemicals or abrasives for
cleaning.
Do not immerse the worklight in liquids of any kind.
Operation
8
Werbung
