Settings For Pc (Dvi); Select Inputs - Fujitsu MYRICA serie Betriebsanleitung

Operator control

Settings for PC (DVI)

Select inputs

28
Downloaded From TV-Manual.com Manuals
V Pos.
S Sets the vertical picture position [
V Size
S Sets the vertical picture size [
H Pos.
S Sets the horizontal picture position [
H Size
S Sets the horizontal picture size [
Phase
S Eliminate flickering and distortions.
S To close the menu press the red button.
S Press the [MENU] button to open the main menu.
S With the button [ ] or [
Y
menu and press the button [
S Select <Overscan> [ ] / [
Y
[ ].
"
Overscan
S
Switch <Overscan> on and off [
As soon as the option Overscan is switched on, the
edge of the picture is cut by approx. 10 %. Any faults
on the edge of the picture are eliminated or made
non-visible by this cutting facility.
S To close the menu press the red button.
For the selection of an input use the selection menu
<Inputs>.
S Press the button [SOURCE] or [F4] to open the se-
lection menu <Inputs>.
S
Select input [ ] / [ ] and then press the red button.
Y B
] / [ ].
A "
] / [ ].
A "
] / [ ].
A "
] / [ ].
A "
] select the <Display>
B
].
"
] and press the button
B
] / [ ]
A "
ENGLISH