Osd Menu Control; Basic Settings; Automatic Channel Search - Fujitsu MYRICA serie Betriebsanleitung

OSD menu control

Basic settings

Automatic channel search

Downloaded From TV-Manual.com Manuals ENGLISH
The performance of settings in the OSD menu is
described in detail below.
S Press [MENU] to display the main menu on screen.
S With the button [ ] or [ ] select a menu option and
Y B
press the button [ ].
"
S Repeat this procedure until the desired menu
option is reached.
Selected menu options are marked with a blue bar.
Menu options with a further submenu or that can be
executed directly are marked by
S
With the buttons [ ] / [ ] select the desired option
A "
or a parameter and press the [MENU] button.
S Press the [MENU] button to return to the previous
menu.
S If you want to close the OSD menu, press the red
button.
In each menu those buttons that you can use for
control are displayed in the bottom section.
S Press the [MENU] button to open the main menu.
S
With the button [ ] or [ ] select the <Setup> menu
Y B
and press the button [ ].
"
S
Select <Tuner> with the button [
the button [ ].
"
S Select the menu option <Auto Search> [
press the button [ ].
"
S Select the country [ ] / [
A "
S Select <Search form> [ ] / [
Y
S Select the search form [
A
You can select between two possibilities:
All channels and new channels.
S
Select <Start search> [ ] / [
Y
[ ].
"
Operator control
.
] or [ ] and press
Y B
] / [ ] and
Y B
].
].
B
] / [ ].
"
] and press the button
B
15