Connection To The Hdmi Input; Connection To The Pc Dvi-I Input; Settings For Pc (Rgb) - Fujitsu MYRICA serie Betriebsanleitung

Connection to the HDMI input

Connection to the PC DVI-I input

Settings for PC (RGB)

Downloaded From TV-Manual.com Manuals ENGLISH
HDMI
Signal
PC (DVI)
Signal
PC (RGB)
Signal
The LCD/plasma TV is equipped with an HDMI input
for digital video and audio signals.
Connect an HDMI-compatible device, e.g. a DVD
player or a set top box with an HDMI output socket,
to the HDMI input.
S Press the button [F4] to open the selection menu
<Inputs>.
S Select input [ ] / [ ] and then press the red button
Y B
(M).
You can also select the HDMI input by means of the
[VIDEO] button.
Signal:
640 x 480 @ 60 Hz
480i, 576i, 480p, 576p, 720p, 1080i
HDMI (RGB, YUV) sound 2 channels up to 48 kHz
DVI (RGB), sound via digital COAX IN
For the connection of a PC use the input PC DVI-I.
If your PC has a digital DVI output, use a DVI cable for
connection.
If your PC has an RGB output (DSUB 15), use a DVI
adapter cable on a DSUB for the connection.
S
Press the button [F4] to open the selection menu
<Inputs>.
S Select input [ ] / [ ] and then press the red button
Y B
(M).
You can also select the PC inputs by means of the
[PC] button.
S
Press the [MENU] button to open the main menu.
S With the button [ ] or [ ] select the <Setup> menu
Y B
and press the button [ ].
"
S
Select <Inputs> [ ] / [ ] and press the button [
Y B
Auto Setup
S
Press the button [ ] to start Auto setup.
"
This function will now attempt to find the optimal pic-
ture settings for the pending signal. During setting
the picture will move slightly back and forth.
H Total
S You can correct the scanning frequency for the PC
picture here. This function is intended only for com-
petent users.
Operator control
].
"
27